NEED ASSISTANCE?
Please contact our customer service support at (847) 763-1215
and we’ll be happy to assist with any assembly questions,
comments, or concerns.
ROSSETO
®
3714 Jarvis Avenue, Skokie, IL 60076
Visit our website at www.rosseto.com
Multi-Chef™ Induction Heaters
120V
~
60Hz
220V
~
50Hz
SMM337
:
Black Single Induction 5”
SMM341
:
Black Single Induction 5”
SMM339
:
Black Single Induction 10”
SMM342
: Black Single Induction 10”
SETTING UP YOUR PRODUCT
CARING FOR YOUR METAL BASE
1. Carefully remove all parts from packaging. Be sure to remove
packaging around entire induction unit and packaging between
induction unit and base.
2. Make sure you have all parts listed before discarding
packaging.
• One 5 inch or 10 inch Metal Base
• One Single Induction Heater
3. The base will have 1 remote holder attached (Figure 1).
4. Slide the remote into the holder (Figure 2).
5. Place the remote cord in the small cutout at the top and pull the
power cord through the large cutout at the bottom (Figure 3).
•
Use a damp microfiber cloth to lightly wipe the metal frame clean. Make sure to dry completely.
•
Stow your metal base in the box it came in to keep it protected.
•
Do not place metal base in the dishwasher.
•
Do not use alcohol, ammonia, or any chemical-based cleaners.
•
Do not use abrasive materials such as scrapers or metal-based brushes.
Figure 3
Figure 2
Figure 1
Single Induction Heater with
5” Black Metal Base
11.9 x 11.9 x 5 Inches
Single Induction Heater with
10” Black Metal Base
11.9 x 11.9 x 10.4 Inches
IS051 V1- FEB 25, 2019
