Description
Command
Send the command to OverDrive
®
to
activate a particular button on
rundown control.
•
Use the Trans knob to select the
transition rate.
OverDrive:
Transition
Pbus
Press
Insert Event
>
Pbus
.
Description
Command
Send the command to the Pbus device
to recall a memory from the selected
register.
Recall
Send the command to the Pbus device
to store a memory to the selected
register.
Store
Send a trigger value to the selected
port on the Pbus device.
Trigger
Robotic Camera
Press
Insert Event
>
More
>
Robotic Camera
.
Description
Command
Quickly stop all robotic camera
operations. Use this event to stop all
motion of a robotic.
Cam All Stop
Deselect the robotic camera that was
last selected. When a camera is
selected by the switcher, that camera
remains selected until another camera
is selected, or the Deselect Cam event
is run.
Deselect Cam
Disable control of the selected robotic
camera. When a camera is disabled,
you cannot control it from the
switcher.
Disable Camera
Execute a prepared camera move on
a particular camera. Use the Shot knob
to select the move you want to
execute. The move must be prepared
before it can be executed.
Execute Move
Select which camera is assigned to the
positioner by cycling through all the
cameras selected on preview, one at
a time. Each time the custom control
is run, the positioner assignment will
jump to the next camera that will go
on-air with the next transition.
Grab Positioner
Prepare a camera move on a particular
camera. Use the Shot knob to select
the move you want to prepare.
Prepare Move
Description
Command
Recall a shot on a particular robotic
camera with a specific duration for the
recall to be performed. When
programming this event, you are
recalling a specific camera on a remote
port by selecting the BNC, or BNC
name.
Recall Shot
Overwrite the last prepared shot or
recalled move with the current
position of the camera. For a move,
only the prepared position is
overwritten. You must re-prepare the
move before you can execute it.
Resave Last
Load a set of shot recalls for a robotic
camera.
Set Show
RossTalk
Press
Insert Event
>
More
>
RossTalk
.
Tip:
Press Show Keyboard to bring up a virtual keyboard on
the display. Only those custom controls that support text strings
as an input have the option of showing the keyboard.
Description
Command
Run a custom control.
1.
Press Bank and use the Bank
knob to select the bank you want
to run the CC from.
2.
Press Macro and use the Macro
knob to select the CC you want to
run.
CC
Clear all frame-buffers.
ClearAllFB
Clear a specific frame-buffer.
•
Press Buffer ID and use the Buffer
ID knob to select the frame-buffer
you want to use.
ClearFB
Clear a specific layer in a specific
frame-buffer.
1.
Press Layer ID and use the Layer
ID knob to select the layer you
want to use.
2.
Press Buffer ID and use the
Buffer ID knob to select the
frame-buffer you want to use.
ClearLayerFB
Move the current selection in the
Sequencer to the item below in the list.
Down
Set the Sequencer focus to a specific
template.
•
Press Take ID and use the Take
ID knob to select the take id for
the template you want to load.
Focus
Perform a fade to black transition.
FTB
78 • Custom Controls — Ultrix Acuity Operation Manual (v10.1)