3.
Press the button for the key (
KEY X
) or utility
(
UTIL Row X
) that you want to assign to the
bus.
Tip:
Toggle Lock Key Row to On to lock the assignment of
the key bus row to the current selection.
Quick Presets
You can set up quick presets for where to assign
a panel row or button row.
The quick presets can be accessed either from
the ME Selection menu or through panel
shortcut buttons, depending on the control panel
you have.
• Standard Panel — Press the
SEL
button for
that panel row you want to recall a quick
preset on and select the quick preset.
• Double-Down Panel — Press and hold the
mnemonic button for the button row you
want to recall a quick preset for. The source
buttons on that row change to show the
available quick presets. Press the source
button for the quick preset you want to recall.
To Set Up a Quick Preset
Assigning a quick preset is based on how a panel
or button row is currently set. It does not matter
which panel row that the quick setup is
configured on, it will be available to all panel
rows.
1.
Set up a panel row, or button row, how you
want it for the quick preset.
2.
Press the
SEL
button for that panel row, or
the mnemonic button for that button row.
3.
Press
More
>
Assign As Preset
.
4.
Press the quick preset button that you want
to store the current configuration to.
The name of the button updates to show the
current selection.
Ultrix Acuity Operation Manual (v10.1) — Acuity
®
Control Panel Overview • 19