Ross Ultricore RCP-ME, User Manual, Page: 50 / 98

50 • Functions RCP-ME User Guide (v4.0)
3. In the Button list, select Function Key .
4. In the Value field, select Panel Lock as the function to assign to this button.
5. Close the Button dialog.
The simulated RCP-ME in DashBoard shows the lock on the selected button.
Clearing a Function from a Button
If a button is not used for any function it should be unassigned.
To clear a function from a button
1. Open the RCP-ME Panel Config interface (see “ To open the RCP-ME Panel Config interface ” on page 22).
2. On the simulated RCP-ME, select the button from which you want to clear a function.
The Button dialog opens.
3. In the Button list, select Clear Key .
4. Close the Button dialog.
The simulated RCP-ME in DashBoard shows UN-ASN on the selected button.
5. Send the current configuration file to the device (see “ To send the current configuration to a panel ” on
page 74).