5.
Click
Export Type
and select the codec you want to use for the export.
Note:
Only Abekas native
.clip
and AVC-Intra
.mxf
are available when operating in a 1080p video format.
6.
Click
Change
and select the network drive or USB folder that you want to export to.
7.
Click
Select Folder
.
The selected folder is shown in the
Export directory
field.
8.
Select additional export destination as required.
9.
Click
Verify Export Destinations
to verify that all destination can be found.
A message is shown next to the button stating that all destination are valid, or that destinations are
missing. The destinations that are missing are highlighted in yellow.
10.
Click
OK
.
To Export Media Files
Export media files from the server to another format that can be used by another device.
Note:
Some export functions require a channel to export video. Ensure that the channel you want to use for exporting is not being used
before you start the export.
1.
Launch the Tria Explorer application.
2.
Click
Clip Library
.
3.
Select the clip(s) that you want to export in the Clip Library.
4.
Click
Clip Library
>
Export
.
The Export Editor opens with the selected clips listed.
5.
To select a different destination for a clip, right-click on the clip and click
Set Destination...
and
select the new destination.
6.
To set a custom in-point and out-point, load the clip into the selected channel transport and use the
transport controls to locate the new in-point or out-point and click
IN
or
OUT
to set that point. The
timecode for the new in-point and out-point is shown in the table.
Tip:
To split the clip into segments, set the in-point to where you want the segment to end and click Split Segment. A new clip of the
same name and export destination is created.
Tip:
To duplicate the segment, set the in-point and end-point to where you want to new clip to start and end and click Duplicate
Segments. A new clip of the same name and export destination is created.
7.
Select all the clips you want to export and click
Move to Export Queue
.
The Export Queue opens with the selected clips listed.
8.
Click
Start Export
.
9.
If your export requires transcoding, in the
Channel to take offline
list, select the channel that you
want to use for the export and click
OK
.
68 • Export — Tria Express DUET User Manual (v01)