6.
If required, double-click on the time in the
Clip TC Offset
column for the clip and enter the point in
the clip at which you want it to start. This is an offset from the in point of the clip. For example, if
you want the clip to start playing 5 seconds into the clip, enter
00,00,05,00
.
7.
Repeat these steps for every clip in the TC Chase List.
8.
Click
Save
.
To Air a TC Chase List
Take the TC Chase List on-air to play each clip in order at the specified timecode values.
Note:
A TC Chase List has no mix transition and only uses a single channel transport.
1.
Double-click on the TC Chase List you want to air in the Clip Library.
2.
Select the channel transport that you want to play the TC Chase List on.
3.
Click
START TC Chase
on the TC Chase Editor window.
The TC Chase Editor window changes to the TC Chase ON-AIR window. As the timecode reaches
the point for each clip, the clip is highlighted red and plays out on the channel transport. The channel
transport outputs black if no clip is scheduled to play during the current timecode.
Tria Express DUET User Manual (v01) — Clip Library • 65