To Configure the Audio Router
The Audio Input Router tab allows you to set the audio tracks that get recorded into clips stored on the
server and the Audio Output Router tab allows you to set which audio is played from clips stored on the
server.
1.
Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click
Yes
.
2.
Click the
Audio Router
tab.
Tip:
If the audio routing on an input or output has been changed, a dot is shown next to the name on the tab.
3.
Click the
Audio Input Router
tab.
4.
Click on the tab for the record channel transport that you want to route audio tracks to.
5.
In the
ChX Recorder Track 1
row, select the source channel input (
ChX Input
) and the audio track
(
Track #
) from the input that you want to record on track 1 of the clip.
6.
Repeat this step for all of the remaining recorder tracks.
Tip:
Click NORMANIZE ALL ChX Input Routes to reset all the input audio tracks to their default recorder track assignment.
7.
Click the
Audio Output Router
tab.
Tria Express DUET User Manual (v01) — Server Configuration • 17