Ross SYNERGY 4000DR-003, Operation Manual, Page: 269 / 332

Synergy Series Operation Guide (v18) Memory Functions and More • 8–27
6. Eject the storage device from the switcher.
7. Label the storage device and store it in a safe place.
This completes the procedure for saving your setups to a storage device.
Saving Individual Memory Registers
Use the following procedure to save individual Memory Registers to a storage device:
1. Navigate to the Disk Store Individual Items Menu as follows:
• Press HOME B Disk B Store Individual .
Disk Store Individual Items Menu
2. Insert a storage device into the Synergy switcher as follows:
• Insert a pre-formatted 1.44 MB high-density floppy disk (or a floppy disk that
already contains memory registers) into the floppy disk drive of the Synergy
switcher.
OR
• Insert a USB key (or a USB key that already contains memory registers) into the
USB port of the Synergy switcher. You must wait 5 seconds after inserting the USB
key into the USB port before you can save to it.
3. Select the memory registers to save as follows:
• Press Memory Register .
• Use the From switcher knob to select the current switcher memory location that
you wish to save.
• Use the To disk knob to select the location to save the file.
The Memory Legend indicates the meaning of the icons that are displayed beside
the selected files.
Disk Store Individual Items Menu