Ross SYNERGY 4000DR-003, Operation Manual, Page: 20 / 332

1–4 • Introduction Synergy Series Operation Guide (v18)
Documentation Conventions
The following conventions are used throughout this guide:
• Rear panel connectors are indicated in bold-faced upper case letters. For example:
The AUX 1 connector is …
• Control Panel buttons are indicated in bold-faced upper case letters, using a sans-serif
font. For example:
Press WIPE to …
• Menu names on the integral display panel are indicated in bold-faced text. For example:
The Aux Bus Setup Menu allows you to …
• Soft key labels on the integral display are indicated in bold-faced text, using a sans-serif
font. They are
not indicated by the function key below the display that you press. For
example:
Press Accept New Name to register …
• Menu navigation procedures in this manual set state the buttons you are to press
followed by the “
B ” symbol. For example, the following navigation procedure shows
you how to navigate from the Main Menus to the Installation Menus . In this case, you
press Setup on the Main Menu 2-2 , then you press Installation on the Setup Menu .
Press HOME B MORE B Setup B Installation .