Ross SYNERGY 4000DR-003, Operation Manual, Page: 187 / 332

Synergy Series Operation Guide (v18) Keying • 7–13
With the feature enabled, the clean feed alpha signal is routed to the DVE, thus
removing the DVE Send limitations with Squeeze & Tease, Chroma and Auto Select
keys as described above.
• If the
AlphaNomadCK
mode is assigned on the Clean Feed Menu , the clean feed
output will follow the last selected Chroma key. In the Clean Feed From Menu, the MLE
will be locked to the bottom MLE. When a Chroma Key is selected on any Keyer in any
of the MLEs, the clean feed signal will change to the alpha signal for the selected Keyer.
• If the
Alpha Key 1
mode is assigned on the Clean Feed Menu , the clean feed output
will be the alpha for Key 1 of the selected MLE.
• If the
Alpha Key 2
mode is assigned on the Clean Feed Menu , the clean feed output
will be the alpha signal for Key 2 of the selected MLE.
Please consult with your facility engineer to determine how your Synergy switcher is configured.
Refer to the section, “
Clean Feed Setup ” of the Synergy Series Installation Guide , for full details.
Important With DVE Alpha selected and the clean feed alpha signal routed to
the external DVE, the switcher’s Clean Feed output signal (on the
CLEAN output connector) is lost.