Ross SYNERGY 4000DR-003, Operation Manual, Page: 134 / 332

5–2 • Background Transitions Synergy Series Operation Guide (v18)
Transition Group
Each Synergy switcher includes one Program/Preset Transition group, which is located in the
panel’s highest-numbered MLE. The following figure illustrates the Program/Preset Transition
group that is identical for all switchers.
Program/Preset Transition Group
Each switcher includes one or more MLE Transition groups, which are located in the panel’s upper
MLEs — above the Program/Preset Bus . The following figure illustrates the MLE Transition group
that is identical for all switchers.
MLE Transition Group
1) Fader Section 2) Next Transition Section 3) Transition Parameter Section
1) Fader Section 2) Next Transition Section 3) Transition Parameter Section
MLE 4 TRANSITION
ACTIVE
FRAMES
AUTO
TRANS
CUT
PST
BLACK
ROLL
VTR
BKGD DSK1 DSK2
DISS WIPE
DVE
SEND
1
2
3
MLE 1 TRANSITION
ACTIVE
AUTO
TRANS
ROLL
VTR
CUT
TRANS
PV
KEY
OVER
TRANS
LIMIT
BKGD KEY1 KEY2
DISS WIPE
DVE
SEND
1
2
3