Ross SYNERGY 4000DR-003, Operation Manual, Page: 131 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–53
Copy Squeeze & Tease 2D Wipe
The Copy Wipe function also allows you to copy a Squeeze & Tease 2D wipe pattern (and all
associated modifiers) from one MLE to another.
Use the following procedure to copy a Squeeze & Tease 2D wipe:
1. In the source MLE, press
WIPE
and
DVE SEND
to access the Squeeze & Tease wipes.
2. Select a Squeeze & Tease wipe to copy.
3. Press and hold the
WIPE
and
DVE Send
buttons in the destination MLE.
4. Press the
WIPE
and
DVE Send
buttons in the source MLE. All wipe parameters are
copied to the destination.
5. Release both buttons.
This completes the procedure to copy a Squeeze & Tease 2D wipe.
Note If you have a regular wipe on the source MLE when you copy an S&T
wipe, the regular wipe is copied to the destination MLE as well. When
you deselect the
DVE SEND button, the regular wipe from the source
MLE is now active on the destination MLE.