Ross SYNERGY 4000DR-003, Operation Manual, Page: 125 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–47
Aspect Ratio
In the Output Menu , the MLE Aspect Ratio function allows you to change the aspect ratio of each
MLE. Affected switcher modes include:
• A circle wipe in 4:3 remains a circle in 16:9.
• 3D flown keys may change shape from squares to rectangles.
Use the following procedure is to set the aspect ratio of the MLE output:
1. Navigate to the MLE Aspect Ratio Menu as follows:
• Press HOME B MORE B Setup B Installation B Output B MLE Aspect
Ratio .
MLE Aspect Ratio Menu
2. Use the MLE knob to select the MLE.
3. Use the Aspect knob to select either 16:9 or 4:3 mode.
This completes the procedure to set the aspect ratio of the MLE output.