Ross SYNERGY 4000DR-003, Operation Manual, Page: 124 / 332

4–46 • Switcher Basics Synergy Series Operation Guide (v18)
Toggle the preview mask function — On and Off by pressing the
MASK PV
key in the
Preview Overlay group.
Sample Mask Preview Overly
Hide Overlays
The HIDE OVLY button turns off all preview overlays that are currently enabled. When
the button is lit, all overlays are hidden, but your total setup is retained. When the button
is turned off again, all overlays are restored to the monitor.
Toggle all preview overlays that are currently enabled — On and Off as follows:
• Press the HIDE OVLY key in the Preview Overlay group.
Note You can check masks in the various MLEs by pressing the MLE
buttons in the
Effects Control Assignment Section located in the
Effects Control group of the switcher. One button is provided for each
keyer in the MLEs and DSKs.
Note When HIDE OVLY is lit, all enabled overlay buttons also remain lit.
In this way, you can see the hidden functions, and then enable or
disable them as required during the
hidden mode.
HIDE
OVLY