Ross Synergy 2 SD, Installation Manual

Page: 329 / 414

Synergy Series Installation Guide (v18) Editors/OverDrive • 12–3
Editor Communications Connections
You can connect a number of Editors to your Synergy switcher. The procedure for connecting the
Editor will depend on the type of Editor you have. This section will provide general instructions for
connecting the Editor to the Editor Port on the back of the Synergy Frame.
In order to properly complete this procedure you will need the following software options, cables, and
equipment:
• Editor Interface — This is the software option from Ross Video that allows your
Synergy switcher to control a Editor.
• Interface Cable — This is a 9-Pin cable with a 9-Pin, D-Type (DB9) male connector on
one end, to connect to the editor port on the frame, and a connector on the other end to
connect to your Editor. Refer to the documentation that came with your Editor for
information on using it with the Synergy switcher. Ross Video does not supply this
cable.
Use the following procedure to connect an Editor to your Synergy switcher:
1. Connect and secure the 9-Pin , Male , end of the Interface Cable to the Editor Port on
the back of the Synergy frame.
Synergy Series Frame, Rear View — Editor Port
2. Connect and secure the other end of the cable to the appropriate port on the Editor. Refer
to the documentation that came with your Editor for information on the proper port and
cable pinouts for connecting to the Synergy switcher.
Note
These instructions are provided as a guide, for specific information on
the Editor you are connecting to the Synergy switcher, refer to the
documentation provided with the Editor.
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24
25 26 27 28
29 30 31 32
33 34 35 36
37 38 39 40
41 42 43 44
53 54 55 56
61 62 63 64
PV EXP
4
EXP
2
AUX
11
OVL SPARE
EXP
3
EXP
1
AUX
12
PV CLEAN
PGM
AUX
6
AUX
4
AUX
8
AUX
10
AUX
5
AUX
3
AUX
2
AUX
1
AUX
7
AUX
9
57 58 59 60
45 46 47 48
49 50 51 52
DVE 1
DVE 2
PERIPHERAL 1
PERIPHERAL 2
EDITOR
GPI
PANEL
NOTE:
REFERENCE CAN
COME FROM ANY
INPUT
ROSS VIDEO LTD.
MODEL
ISSUE
SERIAL#
RATING:
85 - 250 V
47 - 63 Hz
600 WATTS
CAUTION: DISCONNECT POWER
BEFORE SERVICING
ATTENTION: COUPER LE COURANT
AVANT L'ENTRETIEN
RATING:
85 - 250 V
47 - 63 Hz
600 WATTS
INPUTS
AC POWER
PRIMARY
REDUNDANT
OUTPUTS OUTPUTS
PV PV PV
PGM
MAIN MLE 4 MLE 3 MLE 2 MLE 1
PGM PGM PGM
DIGITAL PRODUCTION SWITCHER
SERIES
!
PERIPHERAL 2
EDITOR
GPI
Editor
Port