Ross Synergy 100 MD, Operator'S Manual

Page: 86 / 402

5–6 • Transitions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
3. Press the AUTO TRANS button to perform a transition.
The resulting transition will take Key 2 on-air, and the ON AIR indicator below the
KEY2 button will be lit.
4. Simultaneously press the BKGD and KEY1 buttons. Both buttons will now be lit.
5. Press the
CUT
button to perform a transition.
The resulting transition will take Key 1 on-air, as well as perform a flip-flop of the
PGM / PST buses. Notice that the
ON AIR
indicator below the
KEY1
button will be lit,
and the
ON AIR
indicator below the
KEY2
button has not changed.
6. Press the
KEY2
button.
7. Move the Fader Arm from one limit to the other to perform a transition.
The resulting transition will take Key 2 off-air and the ON AIR indicator below the
KEY2 button will no longer be lit.
8. Simultaneously press the BKGD , KEY1 , and KEY2 buttons. All three buttons will now
be lit.
ON AIR ON AIR ON AIR ON AIR
ON AIR
BKGD KEY1 KEY2
DISS
CUT
WIPE
AUTO
TRANS
TRANS
LIMIT
DSK
CUT
PST
BLACK
DSK
DISS
FADE
TO
BLACK
DVE
T R A N S I T I O N C O N T R O L
ON AIR ON AIR ON AIR ON AIR
ON AIR
BKGD KEY1 KEY2
DISS
CUT
WIPE
AUTO
TRANS
TRANS
LIMIT
DSK
CUT
PST
BLACK
DSK
DISS
FADE
TO
BLACK
DVE
T R A N S I T I O N C O N T R O L
ON AIR ON AIR ON AIR ON AIR
ON AIR
BKGD KEY1 KEY2
DISS
CUT
WIPE
AUTO
TRANS
TRANS
LIMIT
DSK
CUT
PST
BLACK
DSK
DISS
FADE
TO
BLACK
DVE
T R A N S I T I O N C O N T R O L