Ross Synergy 100 MD, Operator'S Manual

Page: 72 / 402

4–10 • Switcher Basics Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Flip-Flop Operation — Buses Before Transition
After the Background transition is performed, the two buses switch crosspoint selections so that
VTR 1
is now on the PGM bus and
CAM 2
in on the PST bus. This is a Flip-Flop.
Flip-Flop Operation — Buses After Transition
If you were to perform another background transition, the crosspoint selections would Flip-Flip back
to the original selections.
In this manner, the PGM bus always shows the crosspoint source that is on-air and the PST bus
always shows the crosspoint source that will be taken on-air during the next Background transition.
Key Bus
The Key Bus is where you select the crosspoint source for Key 1 , Key 2 , and the DSK . The Keyer
that has control of the Key Bus is indicated to the left of the bus by the illuminated name. In the case
of the MultiDSK option, the DSK indicator will be lit, and the Key Bus will be assigned to the DSK
that the Downstream Keyer Group is assigned to.
Key Bus
Operating
Tip
As you switch between Key 1, Key 2, and the DSKs, the crosspoint
buttons will indicate which sources are selected for that key. If you
change a source, this will not affect the other selections.
KEY1
KEY2
DSK
PGM
PST
BLACK SHIFT
SHIFT
SHIFT
BLACK
CAM
1
VTR
1
VTR
2
VTR
3
CG
1
CG
2
Global
Store1 CAM
2
CAM
1
VTR
1
VTR
2
VTR
3
CG
1
CG
2
Global
Store1 CAM
2
CAM
1
VTR
1
VTR
2
VTR
3
CG
1
CG
2
Global
Store1 CAM
2
BLACK
KEY1
KEY2
DSK
PGM
PST
BLACK SHIFT
SHIFT
SHIFT
BLACK
CAM
1
VTR
1
VTR
2
VTR
3
CG
1
CG
2
Global
Store1 CAM
2
CAM
1
VTR
1
VTR
2
VTR
3
CG
1
CG
2
Global
Store1 CAM
2
CAM
1
VTR
1
VTR
2
VTR
3
CG
1
CG
2
Global
Store1 CAM
2
BLACK
KEY1
KEY2
DSK
BLACK SHIFT
CAM
1
VTR
1
VTR
2
VTR
3
CG
1
CG
2
Global
Store1 CAM
2