Ross Synergy 100 MD, Operator'S Manual

Page: 69 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Switcher Basics • 4–7
Isolate MultiDSK
You can isolate the two MultiDSKs to prevent them from being affected by memory recalls and
switcher soft-resets. Isolated MultiDSKs also can not be included in Program/Preset-MLE transitions
(you can still transition them using the keys in the
Dowstream Keyer Group . Isolated MultiDSKs are
not affected by certain actions that you perform on the switcher as follows:
• Memory Recalls — Memory registers that were saved with MultiDSK sources and
configurations will not overwrite the current MultiDSK settings when recalled. The
non-MultiDSK settings in the memory registered will be recalled.
• Switcher Soft-Reset — Performing a switcher soft-reset will not return the MultiDSKs
to a default state. All MultiDSK settings including the selected source, key type, and
on-air status will be preserved.
• Program/Preset MLE Transitions — You can not include MultiDSKs in
Program/Preset MLE transitions. You must transition the MultiDSKs on and off-air
using only the buttons in the
Downstream Keyer Group .
Use the following procedure to isolate your MultiDSKs:
1. Navigate to the Personality Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
6. Personality
to display the Personality Menu .
Personality Menu
2. Press
6. Isolate DSK
to toggle this option on or off.
This completes the procedure to isolate your MultiDSKs.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Personality - Synergy 100
0. Trans PV
1. DSK Drop
2. Sleep Time
3. Menu Bttn
4. AutoRcall 5. GstoreMem On
6. Isolate DSK Off On
Manual
10 min
Menu Only
On