Ross Synergy 100 MD, Operator'S Manual

Page: 335 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) WARP Effects
•
19–11
Lighting Position Parameters
The Lighting Position parameters are accessed by pressing
9. Lighting Pos.
on the Globe WARP
Menu .
Globe WARP Menu — Lighting Position Parameters
• Use the
HUE
knob to adjust the size of the gleam effect produced by the simulated light
source.
• Use the
SAT
knob to rotate the simulated light source along the Z-Axis.
• Use the
LUM
knob to rotate the simulated light source along the X and Y-Axis.
Heart
This WARP has the following parameters that can be adjusted:
• Position — This parameter adjusts the position and size of the effect.
• Rotation — This parameter adjusts the rotation of the effect along either the X, Y or Z
Axis.
• Border — This parameter adjusts the border size.
• Border Color — This parameter adjusts the luminance, saturation and hue of the
border.
• Movement — This parameter adjusts the rotation along the X, Y or Z Axis.
WARP Menu — Heart
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Rotation
6. Position
7. Movement
8. Lighting
9. Light Pos.
Globe
Light Pos.:
Gleam Size: 2.5%
Z-Rot: 0.125
X-Y Rot: 0.625
Active Warp: Heart
Warp Key 1
0. Category Favorites
1. Warp List
5. Position
6. Rotation
7. Border
8. Border Color
9. Movement
Heart