Ross Synergy 100 MD, Operator'S Manual

Page: 280 / 402

17–4 • Squeeze & Tease MD Sequences and Wipes Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Using the Sequence Menus
The Synergy 100 MD Sequence Menus includes options to create and load sequences, modify the
parameters of sequences, and save sequences for future use.
Navigating to the Sequence Menus
Use the following procedure to navigate to the Sequence Menu :
1. Press
MENU
to display the Main Menu .
2. Press
8. S&T MD
to display the S&T MD Menu .
3. Press
2. Sequence
to display the Sequence Menu .
Sequence Menu
Overview of the Sequence Menus
When the Sequence Menu is initially accessed, the only actions available are to load a sequence from
memory or to insert a keyframe.
Sequence Menu — Insert Keyframe Menu
The Sequence Menu provides the following information about a sequence:
• Selected Keyframe — This field indicates the current selected Keyframe in the
sequence.
• Wipe Modifier — This field indicates how the sequence ends if it is being used as a
transition.
Remember, the sequence rate determines how fast the sequence will play on the switcher
when run via the
AUTO TRANS button. When you create the sequence, you establish
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Sequence Key 1
0. Load/Save Sequence
1. Previous Keyframe
2. Next Keyframe
3. Insert Keyframe
4. Overwrite Keyframe 5. Delete Keyframe
6. Delete Workspace
7. Wipe Modifier
8. Modify Keyframes
9. Keyframe Parameters
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Sequence Key 1
0. Load/Save Sequence
1. Previous Keyframe
2. Next Keyframe
3. Insert Keyframe
4. Overwrite Keyframe 5. Delete Keyframe
6. Delete Workspace
7. Wipe Modifier
8. Modify Keyframes
9. Keyframe Parameters
Sequnc01
Keyframes : 1
Duration : 00:00:30
Keyframe : 1
Wipe: Spin Off
Sequence name
Total number of
keyframes in sequence
Duration of sequence
Selected keyframe
in sequence
Wipe modifier