Ross Synergy 100 MD, Operator'S Manual

Page: 272 / 402

16–4 • Preprocessor Effects Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Mosaic Effect
The Mosaic Effect allows you to transform the channel image into an arrangement of tiles. The size
of the horizontal and vertical tiles is indicated.
Use the following procedure to apply the Mosaic Effect to a channel image:
1. Navigate to the Preprocessor Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 3. Preprocessor to display the Preprocessor Menu .
2. Press 1. Mosaic to display the Mosaic Menu .
Preprocessor — Mosaic Menu
3. Adjust the size of the tiles as follows:
• Horizontal Tiles — Use the HUE knob, or move the Positioner left and right , to
adjust the size of the horizontal tiles in pixels.
•
Vertical Tiles
— Use the
SAT
knob, or move the Positioner up and down , to
adjust the size of the vertical tiles in pixels.
•
Overall
— Use the
LUM
knob, or twist the Positioner knob clockwise and
counter-clockwise , to adjust both values adjust both values equally.
This completes the procedure for applying the Mosaic Effect to a channel image.
Operating
Tip
You can use the PREPROC hotkey to display the Preprocessor
Menu directly.
Note If the effect is not On (not yet in use), you must press 1. Mosaic
again, to toggle to effect On .
Use positioner or Hue, Sat, Lum to modify
Preprocessor 1 2 U O1 O2 Key 1
0. Defocus
1. Mosaic
2. Posterize
3. Colorize
4. Strobe
Mosaic Horiz. Tiles: 0.0%
Vert. Tiles: 0.0%
Overall
Off
On
Off
Off
Off