Ross Synergy 100 MD, Operator'S Manual

Page: 259 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Borders • 15–3
Border Size
The Size feature allows you to adjust the size of the border.
Use the following procedure to adjust the size of a border:
1. Navigate to the Border Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 1. Border to display the Border Menu .
2. Press 0. Size to display the Size Menu .
Border — Size Menu
3. Use the HUE knob, or move the Positioner left and right , to adjust the size of the border
around the channel.
As you adjust the size of the border, it expands equally inwards from the edge of the channel. The
graphic below shows the border in relation to the channel. The border is represented by a solid line
and the outside edge of the channel is represented by the dashed line.
Border Size Graphic
This completes the procedure for adjusting the size of a border.
Operating
Tip
You can use the BORDER hotkey to display the Border Menu
directly.
Use positioner or Hue, Sat, Lum to modify
Border 1 2 Key 1
Size Size: 0.0%
Softness: 15.0%
Symmetry: 50.0%
0. Size
1. Style
2. Corners
3. Color
4. Advanced Off 5. Auto Default
Channel
Border Edge