Ross Synergy 100 MD, Operator'S Manual

Page: 250 / 402

13–12 • Position/Crop Functions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Freeze
The Freeze effect will pause the video of the current channel, creating a temporary still. While the
video is frozen, you still have complete control over the channel, including position and rotation.
Use the following procedure to freeze a channel image:
1. Navigate to the Position/Crop Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 0. Position/Crop to display the Position/Crop Menu .
2. Press 8. Freeze to display the Freeze Menu .
Position/Crop — Freeze Menu
This completes the procedure for freezing a channel image.
Note
Freeze currently cannot be applied to multiple channels at once. If you
need to freeze more than one channel, you will have to select each
channel and freeze it individually.
Operating
Tip
You can use the POSN hotkey to display the Position/Crop Menu
directly.
Note If the effect is not On (not yet in use), you must press 8. Freeze
again, to toggle to effect On .
Operating
Tip
When you move a channel from one Key to another, the channel will
no longer be frozen. For example, if a channel is on Key 2 and you
unfly it and then reallocate it to Key 1, the channel image will no
longer be frozen.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Position/Crop 1 2 U O1 O2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Off
On