Ross Synergy 100 MD, Operator'S Manual

Page: 229 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Basic Operation • 12–19
Channels
The Channels section of the Channel Listing shows how many channels are currently assigned to the
Key. These channels correspond to the Squeeze & Tease channel resources that the switcher can
allocate to the selected Key. Although both Keyers are pulling from the same Squeeze & Tease
channel resource pool, the channel listing for each Key are separate. This means that
Channel 1 on
Key 1 is separate and distinct from Channel 1 on Key 2 . For example, if you Fly a Key in Key 1 , this
will consume the first channel in that Key, and the
1
in the Channel Listing will change color to
indicate this. If you then Fly a Key in Key 2 , this will consume the first channel in that Key, and the
1
in the Channel Listing will change color to indicate this. A total of
4
Squeeze & Tease channels
resources are available across Key 1 and Key 2 .
Active Keyer
The Active Keyer section of the Channel Listing shows which Keyer is currently active. All channel
manipulation will be applied to this Key. If both Keyers are selected, the Active Keyer will appear as
Key 1+2
on the menu.
Note A single channel could be consuming 1 or 2 Squeeze & Tease channel
resources, depending on the type of Key you are flying.
Operating
Tip
You can select both Key 1 and Key 2 at the same time by
double-pressing the KEY2 button in the Effects Keyers Group . Both
Keys must be Flying.
Note You can only Fly a Key in the Effects Keyer. Downstream Keys do not
support Flying Keys.
1 2 Key 1
Channels
1 2 Key 1
Active Keyer