Ross Synergy 100 MD, Operator'S Manual

Page: 208 / 402

11–26 • Global-Store Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Performing a Capture
Use the following procedure to capture a still from your Preview output as follows:
1. Navigate to the Global-Store Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
0. Effects
to display the Effects Menu .
• Press
6. Global-Store
to display the Global-Store Menu .
Global-Store — Main Menu
2. Ensure the correct source output for the still image you wish to capture is selected on the
Preview Bus.
3. Press
3. Capture Screen
to capture the still image. The softkey
3. Capture Screen
is grayed out while the capture is in progress.
This completes the procedure to capture a still image from your Preview output.
Restarting the Global-Store
The System Resets Menu includes the Restarting Global-Store function. This function resets the
Synergy 100 MD Global-Store and video processor. Use this procedure if you are experiencing
difficulties with the Preview Overlay, Global-Store, or as directed by Ross Video Technical Support.
Use the following procedure to restart your Global-Store to factory defaults:
1. Navigate to the System Resets Menu as follows:
• Press MENU to display the Main Menu .
• Press 7. Options to display the Options Menu .
• Press 5. System Resets to display the System Resets Menu .
System Resets Menu
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Global-Store Global-Store 1
0. Select
1. Manage
2. Properties
3. Capture Screen
4. Reserved
5. Assign as Default
6. View Default
Still1
Number: 53
Size: 1920×1080
Alpha: No
Frames: 1
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
System Resets
0. All
1. System Shutdown
2. System Restart
3. Inputs/Outputs
4. Restart Global-Store