Ross Synergy 1, Maintenance Manual

Page: 31 / 240

Synergy 1 and Synergy 100 Maintenance Guide (v16-S1) System Architecture • 2–7
5. Aux Panel Port
One 6-pin shielded telco port labeled
AUX PANEL
is provided for communications
between the frame and remote Aux panels.
6. RVS 210/216 Panel Port
One 50-pin port labeled
210/216 PANEL
is provided for communications between the
frame and the RVS 210 or RVS 216 control panel.
7. GVG 100/110 Panel Port
One 15-pin D-Type port labeled
100/110 PANEL
is provided for communications
between the frame and the GVG-100 or GVG-110 control panel.
8. GPI Input/Output Port
One 25-pin, D-Type port labeled
GPI I/O
is provided for GPI input and output ports.
Please note:
• As standard, the connector provides one common ground, 12 GPI outputs and 12
GPI inputs.
9. Tally Ports
Two 12-pin ports labeled
TALLY
are provided for a total of 16 optional tally relays.
10. Editor Port
One 9-pin, D-Type, RS-422 port labeled
EDITOR
is provided for connection to a
external edit controller. The connection allows the Synergy 1 to be controlled by the
editor using RS-422 commands.
• The port can be configured as RS-422 or RS-232 through the menu system.
11. DVE Port
One 9-pin, D-Type, RS-422 port labeled
DVE
is provided for connection to the primary
external DVE. The connection is designed for control purposes. Please note:
• The port can also be used to connect to the first channel of a DVE that requires one
serial port per channel.
• The port can be configured for additional serial control purposes through the menu
system.
12. Peripheral 1 Ports
The
PERIPHERAL 1
group includes three ports:
• One 9-pin, D-Type, RS-422 port is provided for connection to a primary peripheral
device. The connection is for control purposes. The port can be configured for
additional serial control purposes through the menu system.
• Two BNCs labeled Rx and Tx are provided for communications with peripheral
devices such as the CDK-111A-M.
Note The two Peripheral 1 BNCs share the same internal circuitry as the
9-pin D-Type Peripheral 1 connector. Only one of the two sets of
connectors can be used at a time.