Ross SRG-4400, User Manual

Page: 130 / 193

7–10 • Specifications SRG-4400 User Manual (Iss. 06)
Analog Audio Outputs
Rise and Fall Time
5ns > Rise/Fall <44ns 10% to 90%
Jitter
8ns Typically 2ns
Audio Parameters
Frequency 20Hz to 20KHz Steps of 1Hz
Amplitude -60dBFS to 0dBFS 1dB resolution
Pre-emphasis None
Interruption Programmable
1 second, 3 second, EBU
TECH 3304, Glits, Blits
Quantized Resolution
24bits
Table 7.10 Analog Audio Outputs
Category Performance Requirement Reference Information
Output Connector Type
Molex® MicroClasp™ 2mm, 30-pin
Shared with AES/EBU Audio
and LTC
Number of Outputs
2 x Balanced 1 x stereo balanced pair
Output Impedance
50ohm ±5%
Termination Impedance
600ohm ±5% Calibrated with 600ohm ±1%
Audio Parameters
Frequency 1Hz to 20KHz Steps of <1Hz
Amplitude
Silence and -60dBm
to +18dBm
1dB resolution
Interruption Programmable
1 second, 3 second, EBU
TECH 3304, Glits, Blits
Harmonic Distortion <-50dB Measured at 1KHz
DAC Resolution
18bits
Table 7.9 AES/EBU Audio Balanced Output
Category Performance Requirement Reference Information