3–8 • Configuration
SRA-8802 User Manual (Iss. 04)
Loss of Input
When enabled, this feature will indicate an alarm condition (red) in the
Channel Status
field of
the
Signal
tab. This occurs if the SRA-8802 does not detect a valid input signal for that channel.
To verify which BNC to troubleshoot, refer to the rear module labeling or the
Input
BNC
status
field in the
Setup
tab.
To enable an alarm for a loss of input
1.
From the
Device View
, select the
Alarms
tab.
2.
Select the
Alarm on Loss of Input
check box. The box displays a check-mark.
