Ross PIVOTCam-SE, User Manual

Page: 19 / 43

Remote Control
•
POWER — Turns the camera on or off. The camera
recalls to Home position when turned on. Camera
must be in Working Mode.
•
FREEZE — Freezes or unfreezes the output video of
the camera.
• IRT — Turns IR pass-through on or off. Signals from
the remote control are passed through the serial port
to other cameras or devices.
• SET1-SET4 — Sets the address of the camera. Press
and hold a button for 3 seconds to set the camera
to that address. For example SET1 corresponds to
CAM1 .
• CAM1-4 — Selects a specific camera.
•
Numbers 0-9 — Store or recall camera presets.
Press and hold a number button for 3 seconds to store
the current camera setting to that preset memory.
Alternatively, you can press LEARN and then press
a number button to store a preset. To recall a preset,
press and release its number button.
• LEARN — Used with the LIMIT L , LIMIT R , and
LMT CLR buttons to set and clear the pan limits.
Also used with the number buttons (0 to 9) to store
presets.
• CLR PRE — Deletes a camera preset. Press CLR
PRE and the number of the preset you want to delete.
Press and hold
CLR PRE
to delete all presets.
• FOCUS +/- — Increase or decrease focus manually.
Focus must be set to manual.
• ZOOM +/- — Increase or decrease zoom.
• Navigation Buttons — Pans and tilts the camera
head or navigate the onscreen menus when the menu
system is active. Camera must be in Working Mode
• OK — Recalls the Home position or select a menu
item when the menu system is active. Camera must be
in Working Mode.
•
AF — Turns auto focus on. Manual focus is turned
off.
PIVOTCam-SE User Manual — Remote Control • 19