Camera Overview
IN---RS232---OUT
HD-SDI
GENLOCK
LAN
DC12V
Figure 1: Rear View
Figure 2: Bottom View
•
RS232 IN
— 8-Pin miniDIN for RS-232 or RS-485 serial VISCA IN
control.
•
RS232 OUT
— 8-Pin miniDIN for RS-232 or RS-485 serial VISCA
OUT control.
•
HD-SDI
— BNC for HD-SDI video output. This is the main video
output of the camera.
•
GENLOCK
— BNC for external reference input.
•
LAN
— RJ45 for standard ethernet connection.
•
DC12V
— 12V DC power from external brick. Use only the external
power supply provided with your camera.
•
Tripod Mount
— 1/4" - 20 UNC tripod mounting hole (6.5mm
depth)
•
Tally
— tally light on the front of the camera base shows red (on-air),
blue (operating), green (on preview). Tally status is implemented in
the VISCA protocol.
12
• Camera Overview — PIVOTCam-SE User Manual
Summary of Contents for PIVOTCam-SE
Page 1: ...PIVOTCam SE User Manual...
