Ross Opengear UDC-8625A Series, User Manual, Page: 63 / 174

UDC-8625A Series User Manual (Iss. 11) AFD • 4–5
Using the Force AFD Option
You must configure the Input Settings when the input AFD is absent or you have chosen the
Force AFD option for the ARC Mode:
Table 4.3
Input ARC Mode is Output ARC Mode is Result
Force AFD Auto AFD
Card ignores any AFD data on the input and
applies the settings specified in the
AFD
Code menu in the Input Settings column.
Card automatically determines the most
suitable ARC method for the Output AFD as
defined by SMPTE 2016-1.
Force AFD Force AFD
Card ignores any AFD data on the input.
The settings specified in the
AFD Code
menu in the Input Settings column are
applied.
The output AFD is set in the
AFD Code
menu in the Output Settings column.
Auto AFD Force AFD
Card automatically detects and uses the input
AFD as defined by SMPTE 2016-1.
If the input AFD is not present, the settings
specified in the
AFD Code menu in the
Input Settings column are applied.
The Output AFD is set in the AFD Code
menu in the Output Settings column.
Auto AFD Auto AFD
Card automatically detects and uses the input
AFD as defined by SMPTE 2016-1.
If the AFD is not present, the
AFD Code
Input Settings are applied.
Card also automatically determines the most
suitable ARC method for the Output AFD as
defined by SMPTE 2016-1.
This is the recommended setting.