Ross Opengear UDC-8625A Series User Manual Download Page 59 | Manualshive

Page: 59 / 174

Ross Opengear UDC-8625A Series User Manual Download Page 59

UDC-8625A Series User Manual (Iss. 11)

AFD • 4–1

AFD

In This Chapter

Active Format Description (AFD) is data that is embedded in the ancillary area to describe the
picture format (e.g. 4:3, 16:9) and how it has been converted from one format to another. This
information is intended to define how the video of one aspect ratio will display when another
aspect ratio is used (SMPTE 2016-1). This chapter outlines the AFD controls that the
UDC-8625A series card provides.

The following topics are discussed:

• Overview
• Selecting an ARC Mode
• Blank Number of Active Lines
• Managing the Profiles for ARC
• AFD and ARC Status

Note

— Before proceeding, ensure that you are running DashBoard software version 6.2.0

or higher. You can download the DashBoard Control System software and manual from the
Ross Video website.

«
...
57
58
59
60
61
...
»

Summary of Contents for Opengear UDC-8625A Series















































































































































































Reviews:

No comments