Ross Opengear UDC-8625A Series, User Manual, Page: 32 / 174

2–12 • Installation UDC-8625A Series User Manual (Iss. 11)
UDC-8625A-B Cabling
Refer to Figure 2.12 and the rear module label, for cabling designations. Note that when the card
is configured as 4 in and 4 out , the AES 1-4 connections are the inputs and the AES 5-8
connections are the outputs. Each rear module occupies four slots in the frame and accommodates
one card.
Figure 2.12 Cable Connections for the 8320AR-052A
W
SDI IN 3
SDI IN 4
SDI OUT 2
SDI OUT 4
ANLG
REF IN
SDI OUT 1
SDI OUT 3
SDI IN 2
ETHERNET 10/100
GPIO 2
GPIO 1
GPIO 3
AES 1
AES 8
SERIAL COM (RS-232/RS-485)
AES 6
AES 5
AES 4
AES 3
AES 2
GPIO 4
AES 7
SDI IN 1
1
5
3
2
4
6
8
9
7