Home
/
Ross
/
Opengear UDC-8625A Series
/
User Manual

Ross Opengear UDC-8625A Series, User Manual, Page: 169 / 174

Share

154 pages before
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174

Page: 169 / 174

Ross Opengear UDC-8625A Series User Manual Download Page 169

UDC-8625A Series User Manual (Iss. 11)

Appendix E. Software Licenses • 13–11

MIT

Copyright 1987, 1988 by MIT Student Information Processing Board.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose is hereby granted, provided that the names of M.I.T. and the M.I.T.

S.I.P.B. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. M.I.T. and the M.I.T. S.I.P.B. make

no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.

«
...
167
168
169
170
171
...
»

Summary of Contents for Opengear UDC-8625A Series















































































































































































Reviews:

No comments