Ross Opengear UDC-8625A Series, User Manual, Page: 109 / 174

UDC-8625A Series User Manual (Iss. 11) Appendix A. DashBoard Menus • 9–5
Hardware Tab
Table 9.2 summarizes the read-only information displayed in the Hardware tab.
Table 9.2 Hardware Tab Items
Menu Title Item Parameters Description
Hardware
HW Status
OK (Green)
Normal operation; no hardware errors and the
correct rear module is installed
Incomp I/O module
(Red) Card is connected to an unsupported rear
module
Alarm suppressed
(Green) Rear module is incompatible and the
Incompat Rear Module alarm is disabled
Voltage (V) # Measured input voltage
Current (mA) # Current consumption in milliamperes
Power (W) # Calculated power of the card
FPGA Temp ##C / ##F
FPGA Core temperature. A warning is
displayed when the card FPGA Core
Temperature reaches 85°C. If the temperature
reaches 100°C, the card automatically shuts
down to avoid permanent damage and will
have to be re-booted, or power cycled, to
resume normal operation.
FPGA Fan # RPM
Indicates the card fan speed. If the Stalled
Fan alarm is enabled on the Alarm Enables
tab, this field reports when the card fan is not
operating correctly
CPU Usage x.xx / y.yy / z.zz
Displays the CPU Load average where:
•
x.xx represents in the last minute
• y.yy represents the last five minutes
• z.zz represents the last fifteen minutes
RAM Available # / ## CPU Memory Used / Total CPU Memory
CF Card Status
#.## of # GB used
Displays the amount of space used on the
CompactFlash™ card
Missing CompactFlash card is not present
Unreadable
An error occurred such as incompatible
CompactFlash card, or the card cannot be read
Playout RAM a / b / c / d
Displays RAM memory usage where:
•
a represents the memory in use
• b represents the memory cache from
previously loaded files
• c represents the memory dedicated to the
frame sync buffers and related functions.
Note that this memory is unavailable for
images and animations.
• d represents the total playout memory