7–2 • Specifications
HDC-8223A(-S) User Manual (Iss. 03)
Technical Specifications
This section includes the technical specifications for the HDC-8223A(-S).
Table 7.1 HDC-8223A(-S) Technical Specifications
Category
Parameter
Specification
Serial Digital Video
Inputs
Number of Inputs
2 with manual select or failover
Data Rates Supported
SMPTE 424M, 259M, SMPTE 292M
Impedance
75
terminating
Equalization
(using Belden 1694A cable)
SD: 360m (1180ft)
HD: 180m (590ft)
Return Loss
> 15dB up to 1.485GHz
>10dB up to 2.970GHz
Post-Processor
Serial Digital Video
Outputs
Number of Outputs
Up to four SD-SDI outputs via selector mux
Impedance
75
Return Loss
> 15dB at 5MHz – 270MHz
Signal Level
800mV ± 10%
DC Offset
0V ± 50mV
Jitter (SD)
< 0.2UI (all outputs)
Overshoot
< 0.2% of amplitude
Pre-Processor
(Reclocked) Serial
Digital Video
Outputs
Number of Outputs
Four 3G/HD/SD-SDI BNC
Impedance
75
Analog Composite
Video Outputs
Number of Outputs
Up to four SD analog CVBS via selector mux
Impedance
75
Return Loss
-30dB to 10MHz
Frequency Response
NTSC: 4.8MHz +/- 0.2dB
PAL: 5.8MHz +/- 0.2dB
S/N Ratio
50dB
Differential Gain
0.5%
Differential Phase
°
Analog Audio
Outputs
Number of Outputs
Four balanced using 3-wire removable
Phoenix connectors; 0dBFS = +24dBu
openGear Frame
Communication
Frame Communication
10/100Mbps Ethernet with Auto-MDIX
Environmental
Operating temperature
0°C – 40°C (32°F – 104°F)
Relative humidity (operating or
storage)
< 95%, non-condensing
Power
Power Consumption
< 18W maximum
