GPI-8941 User Guide (v9.0)
Configuring the GPI Outputs • 51
Configuring the GPI Outputs
This chapter applies if you have the following cards:
• GPI-8941-O16
• GPI-8941-O32
• GPI-8941-I16-O16
Configuring the GPI Outputs
The number of GPI Outputs displayed in the GPI Output Setup tab depends on the card model you are using. The
examples in this section feature the GPI-8941-O32 and the number of outputs on your card may differ from what is
presented here.
If the
GPI All Configuration
box is selected in the
Config
tab, you can change the settings for all GPI Outputs
on the
Setup
tab.
For More Information on...
• the options in the
Setup
tab, refer to the section “
• configuring a Timing Window, refer to the section “
Setting up the Vertical Reference Timing Window
To configure a GPI Output
1. From the
Tree View
, select the node for the GPI-8941 you want to configure.
2. Select the
GPI Output Setup
tab.
3. Select the
Setup
tab located at the bottom of the
GPI Output Setup
tab.
Summary of Contents for openGear GPI-8941 Series
