Ross OpenGear DRA-8902 Series, User Manual

Page: 13 / 44

DRA-8902 Series User Manual (Iss. 02) Introduction • 1–5
Documentation Terms and Conventions
The following terms and conventions are used throughout this manual.
Terms
The following terms are used:
• “ Board ” and “ Card ” both refer to the card, including all components and switches.
• “ DashBoard ” refers to the DashBoard Control System.
• “ DRA-8902 ” refers to both the DRA-8902-10 and DRA-8902-16 unless otherwise noted.
• “ DRA-8902-10 ” refers to the DRA-8902 with two inputs and ten outputs.
• “ DRA-8902-16 ” refers to the DRA-8902 with two inputs and sixteen outputs.
• “ Network Controller Card ” refers to the MFC-8322-N, and MFC-OG3-N Series
Network Controller Cards unless otherwise indicated.
• “ OG3-FR series ” refers to the OG3-FR series frames and all available options unless
otherwise indicated.
• “ openGear frame ” refers to all versions of the OG3-FR series frames unless otherwise
indicated.
• “ Operator ” and “ User ” both refer to the person who uses the DRA-8902.
• “ System ” and “ Video system ” both refer to the mix of interconnected production and
terminal equipment in which the card operates.
Conventions
The following conventions are used:
• The “ Operating Tips ” and “ Note ” boxes are used to provide additional user information.