manualshive.com logo in svg

Ross NK RCP-NKM, User Manual

Share
Download
Ross NK RCP-NKM User Manual Download Page 18

3–4 • Installation

RCP-NKM User Guide (v3.0)

4.

Enter the IP Address of the NK-IPS you want to connect to.

5.

Ensure the 

TCP Port

 field is set to 

5000

.

6.

Click 

Finish

.

The NK-IPS now displays as a node in the Basic Tree View of DashBoard.

Checking the Firmware Version of a Device

The RCP-NKM must operate with other devices that have v2.00 firmware or later. Firmware may be updated easily 
using the DashBoard. To check for the latest firmware versions, contact Ross Video Technical Support.

Using DashBoard to Check the Firmware Version

To check the firmware version of any device using DashBoard

1.

Launch DashBoard and connect to the NK-IPS.

2.

In the Device Tree of DashBoard, expand the NK-IPS (or NK-NET) node to display a list of sub-nodes.

Each sub-node is a list of devices communicating with the NK-IPS (or NK-NET).

3.

Double-click the RCP-NKM node to open its interface in DashBoard.

The firmware version is reported in the top panel of the window.

Upgrading the Firmware Version of a Device

For information on upgrading the firmware version of a device, see the readme file that comes with the firmware.

Summary of Contents for NK RCP-NKM

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands