NK-3G144 User Guide (v04)
Operating a Routing Switcher • 51
PSU LED
If a fault condition occurs on the PSU, the mains supply to the PSU needs to be switched off and then on again to
re-establish the 15 V output from the PSU.
Monitoring the NK-3G144 via DashBoard
The status of the NK-3G144 can be monitored via DashBoard.
Monitoring the Overall Status
You can monitor the overall status on the
Config
tab.
To monitor the overall status of the NK-3G144 via DashBoard
1. Open the routing switcher device tab (see “
2. Select the
Config
tab.
3. In the
Config
tab, scroll down the
Status
,
Frame Details
, and
Alarms
areas.
Status Area
The
Status
area displays the following:
Table 6.6 Indicators for the PSU LED
Status
Function
Green, solid
The PSU is producing 15 V output and there are no fault
conditions current for the PSU.
Red, solid
14.6 V is present on the motherboard (from a second PSU),
but there is no output from this PSU, or a fault condition
exists for the PSU.
Fault conditions for a PSU include:
• high temperature
• fan is not operating
• output voltage is off
• current drawn from PSU is > 40 A
Summary of Contents for NK-3G144
