NEWT-SHELF-KIT Install Guide
1000DR-406-01
© 2018 Ross Video Limited. Ross® and any related marks are trademarks or registered trademarks of Ross Video Ltd. All other trademarks are the property of their re-
spective companies. PATENTS ISSUED and PENDING. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken
in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use
of the information contained herein.
CAUTION: Before proceeding, refer to the “Important Regulatory and Safety Notices to Service Personnel” document that was included with your unit. It is also recommended to refer to the
NEWT-IPX
User Guide
which is available for download from our website.
This document outlines how to install a NEWT-IPX on a 1RU Shelf, and then install the 1RU Shelf in a rack frame.
Before You Begin
The 1RU Shelf supports up to three NEWT-IPX modules, each module installed in a separate slot on the 1RU Shelf.
The slot a NEWT-IPX will use determines the placement of the Ear Bracket on the NEWT-IPX chassis.
Before proceeding, it is recommended to:
•
determine how many NEWT-IPX modules you will install and
•
determine the slot(s) on the 1RU Shelf you will install the NEWT-IPX into
Installation Requirements
You will need:
•
One Phillips #2 screwdriver
•
One 1RU Shelf with L-Brackets Kit (Ross P/N NEWT-SHELF-KIT)
•
At least one NEWT-IPX module (a maximum of three modules can be installed on the 1RU Shelf)
Installing the NEWT-IPX in the Middle Slot
To install the NEWT-IPX in the middle slot you must first install the L-Brackets to the front edge of the shelf. The
L-Brackets are used to secure the NEWT-IPX to the 1RU Shelf. Refer to
for install details.
Figure 1
Installing the L-Brackets
To install the Ear Brackets to the NEWT-IPX
1. Affix an Ear Bracket to the left side of the NEWT-IPX.
2. Affix an Ear Bracket to the right side of the NEWT-IPX.