MB-650 User Manual (Iss. 01)
Configuration • 3–3
Using DashBoard
Before proceeding, ensure that the DashBoard Control System is installed on a PC connected to
your facility network. The DashBoard software and user manual are available from the Ross
Video website.
The MB-650 provides two interfaces in DashBoard that display as nodes in the Tree View under
the MB-650. The Network Connect interface (Slot 0 node) provides menus for configuring the
communication settings for the MB-650. The MB-650 interface (Slot 1 node) enables you to set
up the audio features for the physical panel.
To launch DashBoard
1.
Ensure that you are running DashBoard software version 6.0.0 or higher. The software
and
DashBoard User Manual
are available from the Ross Video website.
2.
Launch DashBoard by double-clicking its icon on your desktop.
3.
Locate the MB-650 in the Tree View of DashBoard.
To access the MB-650 interfaces
1.
From the
Tree View
, expand the node for the MB-650 you wish to access.
2.
Select the
Slot 0
node to display the configuration options for the MB-650 in the
right-half of DashBoard.
3.
Select the
Slot 1
node to display the audio interface in the right-half of DashBoard.
Example of an MB-650 in DashBoard
Summary of Contents for MB-650
Page 1: ...MB 650 Monitoring Bridge User Manual...
Page 8: ......
Page 28: ...3 8 Configuration MB 650 User Manual Iss 01...
Page 34: ...4 6 DashBoard Menus MB 650 User Manual Iss 01...
