Video/Audio Output Specifications
Value
Specification
UHD (12Gb/s): SMPTE ST-2082 10-bit at 12Gb/s serial digital
Video Outputs, SDI
HD (3Gb/s): SMPTE 424M 10-bit at 3Gb/s serial digital
HD (1.5Gb/s): SMPTE 292M 10-bit at 1.5Gb/s serial digital
SMPTE
®
2110
Video Outputs, IP
16 Tracks, AES/EBU 48kHz at 24-bit per SDI input.
Embedded Audio
8 Tracks (4 stereo pairs), AES/EBU 48kHz at 24-bit.
AES Digital Audio (TASCAM
®
/AES-59)
3.5mm headphone connector, unbalanced, line-level at -10dBv,
2 Tracks (1 stereo pair), user selectable to monitor any stereo
pair (input or output)
Analog Audio Monitoring Output
Power Rating
Input AC Power Requirement:
• 100 to 240VAC
• 8 to 4A
• 47 to 63Hz
• 500W Max (auto-sensing power inputs)
GPI Port
The GPI port on the back of the chassis is used to connect the external panic button panel. The four GPI
inputs are fixed to a video and audio panic trigger for screeners one and two. All GPIs are level triggered
and remain triggered for as long as the button is pressed (the circuit is closed).
Signal
Pin
Video Panic for Screener 1
1
Audio Panic for Screener 1
2
Video Panic for Screener 2
3
Audio Panic for Screener 2
4
Manual Bypass Switch
5
Tally 1 (Manual Bypass)
6
Tally 2 (External Lamp)
7
44 • Specifications — AirCleaner-2 User Manual (v01)