Ross ACO-4400A, User Manual, Page: 40 / 112

3–6 • Start-up ACO-4400A User Manual (Iss. 03)
Initial Configuration
The ACO-4400A should arrive configured to a “factory default” condition, i.e. all channels set
for Type = Color Black, Operational Mode = Automatic, Output = Primary.
To ensure that you have a suitable channel configuration for the purposes of this Functional
Check, you should perform the following procedures.
To select the number of active channels
1. Verify that you are in the “Top Level” menu: “ACO-4400A”.
2. Select < - System Setup >.
3. [Confirm]
4. Select the System Setup Menu.
5. Highlight < - Configuration >.
6. [Confirm]
7. Highlight < Number of channels >.
8. [Confirm]
9. Set the number of channels. For initial configuration, select 1 channel.
10. [Confirm]
11. Select [Back] twice to return to the “Top Level” menu.
To select the channel type(s)
1. Verify that you are in the “Top Level” menu: “ACO-4400A“.
2. Highlight < -Channel Setup >.
3. [Confirm]
4. Select the Channel Configuration Menu.
5. Highlight the channel to change. For initial configuration, select Channel 1.
6. [Confirm]
7. Select the channel type. For initial configuration, select Color Black.
8. [Confirm]
9. Select [Back] to return to the “Top Level” menu.
Note
— [Confirm] indicates that you should press the Rotary Control, and [Back] indicates
that you should press the blue push-button.