2.
Click the
Audio
tab.
3.
In the
Audio Tracks
area, select the number of audio tracks to record.
•
2 track audio
— record two tracks of audio.
•
4 track audio
— record four tracks of audio
•
8 track audio
— record eight tracks of audio. This option is not available when the server is operating in an SD
video format(525/480i or 625/576i).
•
16 track audio
— (software option) record sixteen tracks of audio. This option is not available when the server
is operating in an SD video format(525/480i or 625/576i).
4.
In the
Audio Tracks in an ISO Clip
area, select the number of audio tracks to record per input channel when
recording in ISO mode.
5.
In the
Audio Muting Policy
area, select how the audio output (AES, embedded, and analog audio out) is muted
during playback.
•
Mute everything except 100% play speed and JOG STEP
— audio is muted at all play speeds except 1×
(100%) and during single-frame jogging.
•
Mute everything except 100% play speed. Mute JOG STEP
— audio is muted at all play speeds except
1× (100%).
•
Mute when speed is not in the range 85% through 115% of play speed
— audio is muted at all play
speeds except in the range of 85% to 115% play speed.
•
Mute when playback speed exceeds 200% play speed.
— audio is muted only when play speed exceeds
2× (200%).
6.
Click
Apply
.
Audio Router Setup
There are two integrated audio routers built into the server. An input router that sends audio from an audio input to any
channel transport, and an output router that sends the audio from a channel transport to any audio output. The number
of audio inputs and outputs depends on the options you have installed in your server. Audio sources and destinations
include embedded audio and AES audio on the TASCAM
®
AES-59 DB25 ports on the back of the server.
To Configure the Audio Router
The Audio Input Router tab allows you to set the audio tracks that get recorded into clips stored on the server and the
Audio Output Router tab allows you to set which audio is played from clips stored on the server.
1.
Launch the
Tria Config
application.
You may be prompted to allow the program to make changes on the computer, click
Yes
.
Tria+ UHD User Manual — Server Configuration •
49
