4.
In the
Record Type
area, select the type of recording you want to do.
•
Append
— arms the channel transport to start recording at the end of the current clip.
•
Overwrite
— arms the channel transport to start recording at the currently selected point in the exiting clip.
Everything after this point in the clip will be overwritten.
5.
In the
Record Tracks
area, select which tracks you want to record.
Note:
Audio is recorded depending on how the Audio Input Source is set in
Tria Config
.
•
Video
— record the video and any embedded audio coming into the Video In BNC, depending on the audio
source.
•
Key
— record the alpha signal coming into the associated Video In BNC.
•
Audio
— record the embedded audio on the Video In BNC, depending on the audio source.
6.
Click
OK
.
The channel transport is now armed to record. The video window shows live video coming into the channel, the
EE
button is on, and the record button ( ) is flashing.
7.
Click the flashing record button ( ) when you are ready to record.
The server starts recording, the
EE
button goes off, the name of the new clip is shown at the top of the channel
transport area, and the
RECORDING
indicator appears.
8.
Click the stop ( ) button to stop recording.
Locking Channel Transport Control
You can lock any channel transport control in
Tria Explorer
. This prevents someone from accidentally loading or
ejecting a clip, or using any of the transport controls.
Note:
Locking a channel transport does not prevent the external control of that channel.
To Lock/Unlock a Channel Transport
Lock a channel so that it can't be accidentally changed directly. Chained, or ganged, channels are not affected by the
lock.
Press and hold the
Ctrl
button and click on the channel transport that you want to lock/unlock.
The channel transport controls are grayed out and a lock symbol is shown over the controls when the channel transport is
locked.
Keyboard Shortcuts
These keyboard shortcuts work on the currently selected video channel transport in the
Tria Explorer
window.
Tip:
Two or more video channel transports can be linked together (Chained) so that commands sent to one channel are also sent to the
others. Not all the keyboard shortcuts support Chain control.
20
• Channel Transport Control — Tria+ UHD User Manual
