To Set Account Passwords
Only the Administrator and Privileged User accounts can have a password.
1.
Log into
Tria Explorer
as the Administrator.
2.
Click
Configure
>
General Configuration
and click the
Passwords
tab.
3.
Enter the new password for the account you want to set the password for. Passwords can use letters, numbers, and
special characters, and are case-sensitive.
Tip:
If the
Privileged User password
field is left blank, you will not be prompted to enter a password when logging in with that
account.
4.
Click
OK
.
Physical Channel Setup
The server comes pre-configured with the channel transports assigned to physical channels on the same server. You can
also assign physical channels from other servers to the channel transports on this server.
To Assign Channel Transports to Physical Channels
Channel transports are assigned to the server. This is already configured from the factory.
20
• Tria Explorer — Tria News User Manual
Summary of Contents for Abekas Tria News
Page 1: ...Tria News User Manual...
