2.
Click the
Tally
tab.
3.
In the
Server Address
field enter the IP address of the device that is sending the TSL tally information.
4.
In the
Server Port
field enter the port number on the device that the server is listening to.
5.
In the
Server Connection Type
area, select the type of ethernet communication you want to use.
•
UDP
— select if the tally server uses the UDP protocol.
•
TCP Server
— select of the tally server is using the TCP protocol as a server.
•
TCP Client
— select of the tally server is using the TCP protocol as a client.
6.
In the
Tally Protocol
area, select the TSL protocol the tally server is using.
•
TSL UMD V5.0
— select if the tally server is using the TSL tally protocol v5.0.
•
TSL UMD V3.1
— select if the tally server is using the TSL tally protocol v3.1.
7.
In the
Assign Preview Tally
area, select which indicator is lit when a channel transport is tallied on preview.
8.
In the
Assign Preview Tally Color
area, select the color to use when a channel transport is tallied on preview.
9.
In the
Tally Index Number
area, enter the tally ID that is assigned on the tally server to the input on the server.
Tip:
Refer to the device that you are receiving the tally information from for the ID that is assigned to the video input that is
connected to the output of each channel on the server.
10.
Click
Apply
.
Network Attached Storage (NAS) Setup
Up to four separate NAS pathways can be added to the server for playout of native-codec .MXF media files directly from
a network drive.
To Set Up the NAS Services
The Abekas
®
SE service must be set up with an administrator account that has permissions to the share folders you want
to access on the NAS devices.
16
• Server Configuration — Tria News User Manual
Summary of Contents for Abekas Tria News
Page 1: ...Tria News User Manual...
