•
– press and hold to fast forward the clip, or press
and release to jump a small interval.
•
STEP
– press
SHIFT
and
STEP
to advance by
a single field.
•
GOTO TC
– quickly jump to a timecode position in
a clip. Use the keyboard to enter the timecode in the
ENTRY
field (HOUR:MIN:SEC:FRAMES) and press
GOTO TC
.
•
GOTO ITEM
– quickly jump to an item in a
numbered list (e.g. Play List or Vue Marks lists).
Select the list, use the keyboard to enter the number
of the list item you want to jump to in the
ENTRY
field, and press
SHIFT
+
GOTO TC
.
•
– play the clip in reverse. The speed of play can be
adjusted using the
VAR 2/3
settings and the T-bar.
•
– stop the current transport action.
•
– play the clip forward. The speed of play can be
adjusted using the
VAR 2/3
settings and the T-bar.
•
LOOP
– loop the playback of the current clip in
PLAYBACK
and
CLIP PLAY
modes. Looping will
go between the in-point and out-point of the clip.
Press
LOOP
to toggle loop play on or off. The
icon is shown at the top of the playout channel border
to indicate that loop mode is active and the
LOOP
button pulses green.
•
LIST LOOP
– press
SHIFT
>
LOOP
to have the
entire Play List loop to the start of the first clip when
it reaches the end of the last clip. The
icon is
shown at the top right in the Play List to indicate that
list loop mode is active and the
LOOP
button pulses
amber.
Tip:
If both Loop and List Loop are active the button pulses
green and then amber.
Replay Window
The
Replay
window allows you to quickly view all the
playout channels and camera inputs for the server, as
well as access Clip Registers, Play Lists, and menu items.
Playout Channels
The playout channels are shown at the top of the window
as the program outputs. The name that appears on each
playout channel can be set from the user settings. You
can select each playout channel using the
P1
,
P2
,
P3
,
P4
buttons on the Control Surface, or the
GANG
button
to select them all. Each playout channel has a custom
color to help you identify it quickly. This color is applied
to the entire border when a playout channel is selected,
and only in a thin line around the image when the playout
channel isn't selected.
The playout mode, timecode, and playback speed are all
shown along the top of the box.
Camera Inputs
Below the playout channels are the camera inputs. This
is the live feed that is coming in from each camera at the
event. Each camera input can be selected by pressing the
corresponding softkey along the top of the Control
Surface.
The camera inputs are tallied with the color of the playout
channel they are selected on. In the example above,
CAMERA 1
is selected on the
PGM-1
playout channel.
The
PGM-1
playout channel has been assigned the
orange color in the user setting and so the box around
the
CAMERA 1
camera input is also orange.
Lists and Menu
Below the camera inputs are the Clip Register list and
the Play List/Menu interface. When one region is active,
the other region is dimmed. The amount of dimming is
set in the user settings.
Softkeys
Mira Manual (v6.1) — Replay Overview •
11
Summary of Contents for Abekas Mira
Page 1: ...Mira Manual v6 1 ...
