Specifications
Resources, video specifications, power rating, and port
pinouts.
The information is this section is subject to change
without notice.
AirCleaner
®
Resources
The number of resources specific to your AirCleaner
®
depends on the model.
ACL-D
ACL-C
ACL-B
ACL-A
Resource
2
Video Inputs
2
Video Outputs
8 channels (4 stereo pairs)
Audio Inputs per SDI I/O
8 channels (4 stereo pairs)
Audio Outputs
70 sec
35 sec
10 sec
5 sec
Delay (HD)
68 sec
68 sec
68 sec
34 sec
Delay (SD)
192.20.200.240
Default IP
255.255.255.0
Default Subnet Mask
0.0.0.0
Default Gateway
Operating Temperature
The system has been qualified at an operational
temperature range of
20-35°C
(
68-95°F
) and a
non-condensing humidity range of
20-80%
.
Note:
Operator is responsible for providing sufficient ventilation
to maintain surface temperature below 40°C (104°F) at the center
of the top cover of the media drive.
Note:
Non-condensing conditions should be maintained at all
times.
Note:
Maximum storage period inside shipping package is one
year.
Video/Audio Input Specifications
Value
Specification
HD: SMPTE 292M 10-bit at
1.5Gb/s serial digital
Video Inputs, SDI
SD: SMPTE 259M 10-bit at
270Mb/s serial digital
Value
Specification
HD: 16 Tracks, AES/EBU
48kHz at 24-bit, 8 Tracks (4
stereo pairs) per PGM IN/AUX
IN.
Embedded Audio
SD: 4 Tracks, AES/EBU 48kHz
at 20-bit, 4 Tracks (4 stereo
pairs) per PGM IN/AUX IN.
Video/Audio Output Specifications
Value
Specification
HD: SMPTE 292M 10-bit at
1.5Gb/s serial digital
Video Outputs, SDI
SD: SMPTE 259M 10-bit at
270Mb/s serial digital
HD: 16 Tracks, AES/EBU
48kHz at 24-bit, 8 Tracks (4
stereo pairs) per PGM
OUT/TAP OUT.
Embedded Audio
SD: 4 Tracks, AES/EBU 48kHz
at 20-bit, 4 Tracks (4 stereo
pairs) per PGM OUT/TAP
OUT.
3.5mm headphone connector,
unbalanced, line-level at
-10dBv, 2 Tracks (1 stereo
pair), user selectable to monitor
any stereo pair (input or output)
Analog Audio Monitoring
Output
Power Rating
Input AC Power Requirement:
•
100 to 240VAC
•
3 to 1.5A
•
60 to 50Hz
GPI Port
The GPI port on the back of the chassis is used to connect
the external panic button panel. The four GPI inputs are
fixed to a video and audio panic trigger for screeners one
and two. All GPIs are level triggered and remain triggered
for as long as the button is pressed (the circuit is closed).
22
• Specifications — Abekas AirCleaner User Manual (v3.5)